Home > Lighting Application > Lighting for Task (Workstat)

Lighting for Task (Workstat)

Illuminance values cover a broad range of tasks and should take into consideration the worker age, task contrast and task importance. An older worker, where the task is more critical and poor contrast requires higher light levels. Conversely, in situations where the visual task is not critical and the worker is younger, it is recommended that the lower light levels be used.

Key Points:

  • Brightness
  • Clear
  • Long lifespan
  • Variety
     

How many energy saving  lamps or bulbs do you need for your task lighting?

Room Height Wattage of Bulb Distance of Bulb
3 meters 13w,15w 1 meter each
5 meters 20w, 25w 1.5 meter each
8 meters 30w, 45w, 50w 2 meter each
8 meters 65w, 85w, 105w 3 meter each

 

picture (image) of lighting-for-task-deco.jpg

Task lighting can greatly enhance an employee ability to successfully accomplish his or her functions, as well as improve general morale. Truly effective task lighting must be controllable by the worker in order to achieve maximum effectiveness.

The following lighting sources are available for task ( workstat )

Part A: Energy Saving Lamps

The compact fluorescent bulb consists of a high performance electronic ballast and a trichromatic fluorescent lamp. The whole unit is compact and simple in construction and highly effective in light emitting, with soft light, excellent chromaticness and low heat-emission. Moreover, it can be instantly started even at a comparatively low temperature or voltage.

Available for the following fixtures:

  • Table Lamps: Bulb, Candle, Mini Global, Mini U Style, Spiral and Column, Mini Flower.
  • Wall Sconces: Bulb, Candle, Global, U Style, Spiral and Column, Flower.
  • Downlights: Bulb, Candle, Mini Global, Mini U Style, Spiral and Column, Mini Flower.
  • Spotlights: Bulb, Candle, Mini Global, Mini U Style, Spiral and Column, Mini Flower.

 

PART B: LED Lights

The LED light series provide good light distribution, soft and flattering, yet bright enough for applying writing, reading and so on. The LED lighting application is very popular.


Before you buy the lights for the right application, please think about the factors:

  • Select the proper power which will fit in your room or space.
  • Select the right shape and size which will fit in your light fixture.
  • Select the proper color or color temperature in between the 2700K and 6400K labeled packages.
  • Select the right base for your fixture.
  • Select ENERGY STAR® lights for reliability.

Do not use CFLs in recessed and enclosed fixtures

Recessed light fixtures and fixtures that are completely enclosed (no air flow) are more likely to cause early failure for most CFLs. The additional heat generated by the compact fluorescent bulb in the enclosed fixture is too much for the ballast that is integrated into the base of the bulb. Although the CFL will operate in these fixtures, the life of the bulb will be shortened substantially from its rated life.

 

 

Application For Home Lighting

Application For Business Lighting